The SWELL Wakesurf Creator SLIM is designed for boats that have steps or odd shaped hulls that will not allow the SWELL Wakesurf Creator 2.0 or other wake shapers to attach, like the mid 2000’s Mastercrafts, late model Sangers, and many other boat models.
The SLIM has a wave shaping face of 8” x 8” with clipped corners to allow it to fit on large steps on boat hulls. It has four 3” suction cups in series, 3 in front and 1 behind the wave shaping face. It is 16” long in total and made of marine grade polymer and floats. To attach properly to the boat it requires a mostly flat area that is 3.25” vertical by 15” long. The SLIM’s suction cups are designed for marine applications and made of rubber and stainless steel with a plastic handle and stainless steel pins.
Included in the package are instructions, stickers, and a 3’ paracord tether. (please attach to a buoy instead of the boat)
When ready to attach the SWELL Wakesurf Creator Slim to your boat, make sure the area is clear of any residue (there is often a layer of algae the human eye can’t see), for best results apply the Creator Slim while boat is in the water, you will want to push the device into the boat while flipping the suction cup levers (the more pressure towards the boat while pushing the levers the stronger the suction will be). If you decide to tether the device, do no tether it to the boat, tether it to a buoy or something that is easily visible like a spare lifejacket. The force of the boat pulling the creator through the water attached only at the tether will pull through the tether hole.